RopeGun Climbing panels are perfect for setting up a home fitness, climbing, bouldering, or Ninja wall. They’re simple to install, whether you’re adding a few panels or creating a large climbing area.
Panel Specifications
- Each standard panel consists of a ¾” thick plywood climbing panel and a ½” back mounting flange (MDF), totaling 1 ¼” in thickness.
- Panels are pre-assembled in Colorado Springs, Colorado, and shipped as one unit.
- We pre-drill holes and install t-nuts in each panel.
- You provide climbing holds and bolts.
Installation Requirements
- Designed for standard finished stud walls (2×4 or larger wood studs, 16” apart, with ½” sheetrock/gypsum board).
Step-by-Step Installation Guide
- Prepare for Installation:
- Locate wall studs using a stud finder.
- Gather at least four 3 ½” decking screws per panel.
- Mount the Panel:
- Align the panel against the wall.
- Secure each panel with a minimum of four screws, ensuring at least two screws anchor into two separate studs.
- Choose an Installation Method:
- Butt Joint Method: Ideal for fewer panels. Simply align each panel snugly against the next.
- Honeycomb Method: Recommended for multiple panels. Use a ¼” spacer (like cut paint sticks from hardware stores) between panels to create a uniform honeycomb pattern.
- Plan Your Layout:
- Use paper or cardboard cutouts to map out the panel layout on the wall.
- Adjust the layout as needed before the actual installation.
- Tack Panels Temporarily (Optional):
- If available, use an air gun and trim nails to temporarily tack panels in place.
- This allows for easy adjustments before final mounting.
- Secure the Panels:
- Once positioned, pre-drill and countersink screw holes.
- Fasten the panels securely with screws.
- Safety and Assistance:
- It’s recommended to install with at least two adults for ease and safety.
- Floor Clearance:
- Consider starting the wall about 12 inches off the floor to accommodate crash pads or mats.
Need Assistance? Contact RopeGun Climbing, LLC at [email protected] or 703-402-4358 for any installation questions.
